AppLocale 是 MS 給需要跑多言系使用者的一個很方便的前置程式. 會出現亂碼的程式只要選取原生支援的語系, 文字就可以正常的顯示.

小弟有時會要跑簡中和日文的 software, 就套上 AppLocale 再開啟文字就可以正常顯示. 但是在 Windows 7 下無法安裝…但解決方法如下.

1. 按下左下角的 Windows icon
2. 去程式集裡找 Accessories (中文好像是附屬程式集), 裡頭會有 command prompt
3. 按右鍵, 選 Run as administrator
4. 在黑色的 command prompt 下, 目錄題示會是 c:\windows\system32
5. 改目錄去剛才下載的路徑, 本例是 C:\software\applocale, 那就鍵入 cd software\applocale
6. 進去目錄後, 再打 apploc.msi 就會看到原本的安裝精靈
7. 下一步完成後就不會出現錯誤了.

One day after my PC rebooted, I’ve got a BIOS checksum error (Asus P5Q Deluxe) and prompted me that default was loaded. I didn’t care that much and pressed “F1″ to continued.

However, the problem started to occur, I couldn’t get the files out from my home Windows 2003 Server R2!!! I ensured that I typed the correct credential but it kept prompting me for bad user name and password. I pondered. I even created many admin accounts on the server and ensured that I typed the correct credential.

I tried numerous ways to isolate the problem including referencing my wife’s new Dell laptop where another Windows 7 premium is installed. The hackintosh that I was using could even join to the workgroup without a problem. What happened to this custom built power PC?

I have started to search for online help and finally came up with a solution. It’s very simple and I will put it in bold letter.

If you know that your credential is 100% correct and keep getting bad user name and password when joining a workgroup, please make sure you TIME is correct.

That’s all, my time on my PC after the checksum error was restored to 2002….

引述 chih_hong_lai大大在PCDISCUSS論壇上的方法,讓 Tiny 7 Rev 01 可以安裝中文.

我在我的初代 Acer Aspire One 8G SSD 上試過覺得表現差強人意. 可能本身SSD實在是太慢, 還是會有遲緩的現像

其實此版本可以改成繁體中文版但手續有點複雜我大致簡述如下
1.install Tiny7 Rev01

2.安裝EastAsiaFonts for Tiny7 東亞字體補丁. 由此下載. TXWD 大大制作.

3. 執行完畢之後, 中文網站已能見到.

4. 至於輸入法的部份, 廷用原本 Windows 7 內建的輸入法有點複雜, 小弟我是直接採用 Yahoo! 奇摩的 Key key Link: http://tw.widget.yahoo.com/keykey/

5. 如果想用拼音的, 可建議使用 Google 的拼音輸入 Link: http://www.google.com/ime/pinyin/

以下是舊方法, 太複雜, 故刪除.

1.install Tiny7 Rev01

2.安裝EastAsiaFonts_Vista.exe 東亞字體補丁,google找的到.

3.將zh-tw MUI 檔複製回c:windows 及c:program files
請由已安裝win7 RTM 硬碟中提取,搜尋zh-tw 將所有zh-tw目錄壓縮下來即可.

4.安裝中文字型一定要有微軟正黑體.

5.修改登入檔可將下列字串複製存成.reg檔後點開即可.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlMUIUILanguageszh-TW]
“LCID”=dword:00000404
“DefaultFallback”=”en-US”
“en-US”=hex(7):00,00
“Type”=dword:00000112

6.重新開機由控制台更改地區及語言(region and language) 將顯示語言選擇 中文(繁體)(台灣)
後登出在登入即可.其餘格式/位置及系統管理在設定成台灣即可
系統管理這一項千萬別在顯示語言之前設定,將無法開機.